Hot water system requirements | Department of Housing and Public Works

Skip links and keyboard navigation

Skip to primary navigation | Skip to secondary navigation | Skip to content | Skip to content | Skip to footer | Use tab and cursor keys to move around the page (more information)
Skip Navigation LinksDepartment of Housing and Public Works > Construction > Sustainability > Sustainable housing laws > Hot water system requirements

 Hot water system requirements

The mandatory requirements to install energy efficient (gas, solar or heat pump) hot water systems in all new houses and in an existing house located in a gas reticulated area at time of replacement were repealed on 1 February 2013. Homeowners are now able to choose a hot water system that best suits their circumstances, including an electric system.

The Queensland Plumbing and Wastewater Code was amended to remove the requirement to install an energy efficient hot water system. The Queensland Development Mandatory Part 4.1 - Sustainable buildings was also amended to reflect greater choice to homeowners for their hot water system.

Hot water system laws pre February 2013

Between 1 March 2006 and 31 January 2013, owners of new houses and townhouses were required to install an energy efficient hot water system.
 
Between 1 January 2010 and 31 January 2013, owners of existing houses and townhouses located in a reticulated natural gas area were required to install an energy efficient system when their existing electric hot water system needed replacing.
 
Where an existing electric hot water system in a gas reticulation area was damaged by a natural disaster event replacement with another electric system was permitted. A licensed plumber was required to certify that the electric hot water system was damaged by a natural disaster.

Tempering valves

In hot water storage systems for residential buildings, hot water must be heated to a minimum of 60° Celsius to prevent the growth of bacteria such as Legionella.

A tempering device ensures that hot water is delivered to taps at a maximum 50° Celsius. This temperature is considered sufficient for domestic hygiene purposes and effectively reduces the risk of scalding-related injuries from hot water use.

A tempering device is required to be fitted to all new and replacement hot water systems. They can be identified by a blue, green, orange (solar systems) or black plastic cap fitted as part of the system’s piping.

Solar and heat pump endorsement

Since 1 January 2012, solar hot water and heat pump hot water systems must be installed by a hot water installer with a solar and heat pump endorsement from the Queensland Building and Construction Commission. 

Related resources



Last updated 24 June 2016    


Copyright |  Disclaimer |  Privacy |  Right to information |  Accessibility |  Jobs in Queensland |  Other languages

© The State of Queensland – Department of Housing and Public Works 2009–2016

Queensland Government